THERMOSTAT
EAS00464
ASSEMBLING THE THERMOSTAT
ASSEMBLY
1. Install:
S thermostat housing 1
S thermostat 2
S O-ring
3
New
S thermostat housing cover 4
NOTE:
Install the thermostat with its breather hole a
facing up.
EAS00466
INSTALLING THE THERMOSTAT
ASSEMBLY
1. Fill:
S cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" in
chapter 3.
2. Check:
S cooling system
Leaks ! Repair or replace any faulty part.
3. Measure:
S radiator cap opening pressure
Below the specified pressure ! Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR".
6-11
COOL
10 Nm (1.0 mSkg, 7.2 ftSlb)