STARTER CLUTCH AND GENERATOR
5-59
EAS00352
INSTALLING THE STARTER CLUTCH
1. Install:
S starter clutch
NOTE:
S While holding the generator rotor 1 with the
sheave holder, tighten the starter clutch bolt.
S Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701
EAS00354
INSTALLING THE GENERATOR
1. Install:
S woodruff key
S generator rotor 1
S washer 2
S generator rotor bolt 3
NOTE:
S Clean the tapered portion of the crankshaft
and the generator rotor hub.
S When installing the generator rotor, make sure
the woodruff key is properly seated in the key-
way of the crankshaft.
2. Tighten:
S generator rotor bolt 1
NOTE:
S While holding the generator rotor 2 with the
sheave holder 3 , tighten the generator rotor
bolt.
S Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701
ENG
10 Nm (1.0 mSkg)
130 Nm (13.0 mSkg)