Yamaha 2002 TDM900 Service Manual page 265

CAMSHAFT
5. Install:
S timing chain guide (exhaust side)
NOTE:
S When installing the timing chain guide, be sure
to keep the timing chain as tight as possible on
the exhaust side.
S Make sure the match marks a are parallel
with the edge of the cylinder head.
6. Install:
S intake camshaft
(with the camshaft sprocket temporarily
tightened)
NOTE:
S Make sure the punch mark on the camshaft
face up.
S When installing the intake camshaft, be sure to
keep the timing chain as tight as possible be-
tween the exhaust camshaft sprocket and in-
take camshaft sprocket.
7. Install:
S dowel pins
S intake camshaft caps
NOTE:
S Make sure each camshaft cap is installed in its
original place.
S Make sure the arrow mark a on each cam-
shaft cap points towards the right side of the
engine.
8. Install:
S camshaft cap bolts
NOTE:
Tighten the camshaft cap bolts in stages and in
a crisscross pattern, working from the inner
caps out.
5-16
ENG
10 Nm (1.0 mSkg)