Motorola APX 1000 Detailed Service Manual page 98

4-6 Troubleshooting Procedures: Power-Up Self-Check Diagnostics and Repair (Not for Field Use)
Error Code/ Error
Message
01/92
01/93
01/98
01/A2
02/81
02/88
02/90
09/10
09/90
Hardware board
failed
Hardware board
failed
then
Man-Down HW error
Hardware board
mismatch
Hardware board
mismatch
then
Man-Down HW error
Table 4-5. Power-Up Self-Check Diagnostic Actions (Continued)
The radio should be sent to the depot for reprogramming of the security codeplug.
The radio should be sent to the depot for reflashing of the host code.
Send radio to the depot.
The radio should be sent to the depot for reflashing of the tuning codeplug followed by
re-tuning of the radio.
The radio should be sent to the depot for examination.
Cycle power to the radio. If this does not fix the problem, then the radio should be sent
to the depot for reflashing of the DSP code.
Cycle power to the radio. If this fails to fix the problem, then the radio should be sent to
the depot for reflashing of the DSP code.
Cycle power to the radio. If this fails then follow instructions in the secure hardware
failure troubleshooting flowchart.
Cycle power to the radio. If this fails then follow instructions in the secure hardware
failure troubleshooting flowchart.
Bluetooth error. Send radio to depot for examination.
Man-Down feature unavailable. Send radio to depot for examination.
Keypad board does not support bluetooth feature. Send radio to depot.
If the Keypad board type supports "Full feature" – "Mace/GPS/BT", updating the keypad
board firmware should resolve the error message.
Keypad board does not support either bluetooth or Man-down feature or both.
If the Keypad board type supports "Full feature" – "Mace/GPS/BT", updating the keypad
board firmware should resolve the error message.
Diagnostic Actions