Change Network Controller Settings; Connectivity And Network Setup - Xerox Versant 2100 Press System Administration Manual

Connectivity & Network Setup

Change Network Controller Settings

At system installation, the default TCP/IP setting is set to DHCP. This allows the IP
Address and other configuration information to be retrieved automatically from the
DHCP server. Refer to your network administrator for specific network guidelines and
protocols used to connect and communicate with the print server.
To review or change connectivity and network settings for the press, use the following
steps.
1. Log in as System Administrator.
2. Select the Tools button on the Control Panel.
3. Select the Tools icon on the screen.
4. Select System Settings > Network Controller Settings > Connectivity & Network
Setup.

Connectivity and Network Setup

Port Settings
Protocol Settings
Machine E-mail Address/ Host
Name
Proxy Server Settings
5-2
LPD
Port 9100
SNMP
E-mail Notification Service
Internet Services (HTTP)
SOAP
Ethernet Settings
TCP/IP - Common Settings
TCP/IP - Network Settings
E-mail Address
Machine Name
Host Name
Domain Name
Use Proxy Server
Proxy Server Setup
Addresses to Bypass Proxy Server
HTTP Proxy Server Name
HTTP Proxy Server Port Number
HTTP Proxy Server Authentication
HTTP Proxy Server Login Name
HTTP Proxy Server Password
HTTPS Proxy Server Name
HTTPS Proxy Server Port Number
HTTPS Proxy Server Authentication
HTTPS Proxy Server Login Name
HTTPS Proxy Server Password
Xerox ® Versant 2100 Press
System Administration Guide