Operation Of Up/Down Scroll Buttons; Paper Tray Settings; Setting The Paper Tray Priority; Setting Auto Tray Switching Control - Xerox Versant 2100 Press System Administration Manual

Operation of Up/Down Scroll Buttons

Select whether or not to enable continuous scrolling when pressing the up/down scroll
buttons.
1. From the Screen Settings screen, select Operation of Up/Down Scroll Buttons.
2. Select Change Settings.
3. Select Enable or Disable to allow or not allow continuous scrolling.

Paper Tray Settings

At the press, use the Paper Tray Settings area to access and enable Auto Tray Switching
and set the Paper Tray Priority for automatic tray selection.
With the Auto Tray Switching feature enabled, use the Paper Tray Priority setting to
indicate which tray in the system (1, 2, 3, 6 and 7) to use first, second, third and so on
when a tray with the same paper type becomes empty.

Setting the Paper Tray Priority

Assign a priority number to trays 1, 2, 3, 6 and 7 that instructs the system to use them
in the order you want.
1. Press the Tools button on the press Control Panel.
2. Select the Tools icon on the screen.
3. Select System Settings > Common Service Settings.
4. Select Paper Tray Settings.
5. Select Paper Tray Priority.
6. With this item highlighted, select Change Settings.
7. Select the tray and then assign a priority. Select a priority setting and assign a specific
tray to that priority setting.
Note
Only one tray may be set to each priority.
8. Repeat the previous step until all available trays are assigned to priority settings.
9. Select Save.
10. Select Close twice.
The main Tools screen displays.
11. Exit the administrator mode.

Setting Auto Tray Switching Control

The Auto Tray Switching feature is enabled by default for all trays. If this feature is
disabled, enable it before setting the Paper Tray Priority.
Xerox ® Versant 2100 Press
System Administration Guide
Common Service Settings
6-13