Connectivity & Network Setup; Network Controller Settings - Xerox Versant 2100 Press System Administration Manual

Connectivity & Network
Setup
The system administrator can configure network connectivity at the press or at the web
user interface (CentreWare Internet Services). This section describes the configuration
settings available at the local press Control Panel.
Note
More detailed settings are available when using the web user interface at your computer.
Refer to Using CentreWare Internet Services in this guide.
An Ethernet communication cable is connected from the press to the print server for
internet access. Also, a pair of video communication cables are connected from the print
server to the press to allow image information and data to transfer between the two
devices.
Refer to your network administrator for your specific network guidelines and protocols
by which the press is connected and communicates to the print server. The print server
looks for these settings when connecting.

Network Controller Settings

Network Controller Settings
Xerox ® Versant 2100 Press
System Administration Guide
Ethernet Settings
TCP/IP - IP Address Resolution
TCP/IP - IP Address
TCP/IP - Subnet Mask
TCP/IP - Gateway Address
Frame Type
Note: These settings may not be selectable if the print server is not
connected to the press
5
5-1