Maytag MAH4000AWQ NEPTUNE Installation Instructions Manual page 8

6. Loosen the four adjustable washer legs and lock nuts. Install vinyl feet found in installa-
tion package. Feed can be more easily installed when immersed in hot water before
installing. Carefully raise the washer back to an upright position.
STEP 2 - INSTAI,L THE WASHER
1. Install gooseneck end of drain hose into standpipe. Be sure an air-tight connection is
made between the drain hose and the standpipe. Standpipe must be at least 24" high. 36"
high is recommended. NOTE: If drain standpipe is in excess of 5 feet above floor level,
install pump accessory kit, part number 22002136. NOTE: Caution must always be exer-
cised to avoid "kinking" the drain hose. For best performance _e drain hose should not be
restricted in any way, through etbows, couplings or excessive lengths.
- ; F
• i
q