Maytag MAH4000AWQ NEPTUNE Installation Instructions Manual page 2

REQUIRElVlE NTS
120 Volt, 60 Hz. 15 AMP Fuse or Circuit Breaker
Individual branch circuit serving only the washer is recommended. The washer is equipped
with a power cord. NEVER USE AN EXTENSION CORD.
GROUNDING
ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE.
Appliance is equipped with a power cord having a 3-prong grounding plug for use in a
properly installed and grounded outlet.
ADDITIONAL GROUNDING CONNECTIONS
If a separate ground is required by local codes, an accessory kit is available. Connect the
ground wire to the back of the unit by using the wire found in the accessory kit. Secure the
other end of ground wire with the clamp (also in the accessory kit) to a grounded COLD
metal water pipe. NOTE: Cabinet ground screw and washer are found in the customer
package.
NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES
OR HOT WATER PIPES.