Sewing Jig Position At The Sewing Station - Pfaff 3568-12/22 Instruction Manual

Adjustment
13

Sewing jig position at the sewing station

.08.04
13 - 45
Requirement
When the sewing jig is at the sewing station (left end position),
1. rod 3 and crank 6 must be aligned, and
2. the jig frame must be resting against the sewing changeover without pressure.
3
Fig. 13 - 43
Turn stop screw 1 (nut 2) according to requirement 1.
Adjust rod 3 (screw 4) according to requirement 2.
The feed speed of the sewing jig as it travels to the sewing station can be
changed at screw 5 located to the bottom right in the control box. The swinging
speed to the folding station cannot be altered.
6
5
3
2
4
1