Hook Lubrication - Pfaff 3568-12/22 Instruction Manual

Adjustment
13

Hook lubrication

.06.10
13 - 13
Requirement
1. The centrifugal washer 1 must be 1.5 mm above the oil ring 3.
2. When the machine is running at full speed, there should be a fine line of oil after
approx. 10 seconds on a paper strip held over the needle plate cutout.
2
1
3
Fig. 13 - 12
The adjustment is only required when the wick is replaced. After replacing the
wick, make sure that the new one is impregnated with oil.
Move centrifugal washer 1 (screw 2) according to requirement 1.
Check requirement 2; if necessary, move centrifugal washer 1.