Sewing Jig Position At The Folding Station (Home Position) - Pfaff 3568-12/22 Instruction Manual

Adjustment
13

Sewing jig position at the folding station (home position)

.08.06
13 - 47
Requirement
When the sewing jig is positioned at the folding station (right end position),
1. rods 6 and 7 must be aligned with each other, and
2. the distance of the sewing jig 1 to the right side of the table 8 must be parallel 25 mm.
5
7
Fig. 13 - 45
Swing sewing jig 1 in front of the folding station.
Turn stop screw 2 (nut 3) according to requirement 1.
Turn eccentric pin 4 (nut 5) according to requirement 2.
Recheck left end position of the sewing jig and adjust, if necessary. (See chapter
13.08.04 Sewing jig position at the sewing station.)
The exact adjustment of the right end position of the transport arm is based on
the pocket seam as described in chapter 13.08.21 Centering the pocket seam.
6
4
2
7
1
25 mm
3
8