Winding The Bobbin Thread, Adjusting The Thread Tension - Pfaff 3568-12/22 Instruction Manual

Preparation
10

Winding the bobbin thread, adjusting the thread tension

.02
10 - 2
+
-
4
Fig. 10 - 02
Place an empty bobbin 1 onto bobbin shaft 2.
Thread the bobbin in accordance with Fig. 10-02 and wind it clockwise around bobbin 1 a
few times.
Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2
and cam 3.
The bobbin fills up while you are sewing.
If the bobbin 1 is not filled evenly, align thread guide 5 and adjust the bobbin thread
tension with knurled screw 4.
The bobbin winder stops automatically when bobbin 1 is full.
3
5
1
2