Adjustment
13
Centering the needle in the needle hole (in the direction of sewing)
.06.02
13 - 5
Requirement
In straight stitch position, viewed in the direction of sewing, the needle must be centered
in the needle hole in the hook bearing adjustment gauge 4.
4
1
1
Fig. 13 - 04
Unscrew counter presser and needle guard.
Insert a new needle.
Loosen screws 1 and remove thread trimmer unit.
Swing bobbin opener 2 (screw 3) to the right and remove hook.
Fit hook bearing adjustment gauge 4 so that the numbers "418 - 419" can be read from
the right. Bring needle bar to BDC.
Turn eccentric pin 5 (screw 6) according to the requirement.
The hook bearing adjustment gauge 4 remains fitted for further adjustments.
4
3
1
2
5
4
3
6
5
2