Setting Up A Usb Driver In Windows 2000 - Motorola SBV5120 User Manual

Introduction

Setting Up a USB Driver in Windows 2000

Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the
USB cable.
1
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
Startup for a Single User"
Hardware Wizard window is displayed:
2
Click Next.
3
Be sure "Search for a suitable driver for my device" is selected.
4
Click Next.
Home Print
Installation
Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.
on page 7. A few seconds after you complete the USB connection, the Found New
X
15
Exit
Troubleshooting Glossary
SBV5120 Series VoIP Cable Modem User Guide
License
"Cabling and