Introduction
Setting Up a USB Driver in Windows 98
Be sure the SURFboard VoIP Cable Modem CD-ROM is inserted in your CD-ROM drive before you plug in the
USB cable. This CD contains the USB drivers and must be inserted and read by the PC before you connect the
VoIP cable modem to the PC.
1
Connect the VoIP cable modem to your computer with a USB cable. For further instructions, see
Startup for a Single User"
Hardware Wizard window is displayed:
2
Click Next.
3
Be sure "Search for the best driver for your device" is selected and click Next.
Home
Print
Installation
Although your SURFboard VoIP cable modem model number
may be different than in the images in this guide, the
procedure is the same.
on page 7. A few seconds after you complete the USB connection, the Add New
X
10
Exit
Troubleshooting
Glossary
SBV5120 Series VoIP Cable Modem User Guide
License
"Cabling and