Toshiba E-studio 200L Operator's Manual page 212

12.ERROR CODE (Cont.)
Error Code
1C61
1C62
1C63
1C64
1C65
1C66
1C67
1C68
9
1C69
1C6A
1C6B
1C6C
210
9.JOB STATUS
Cause & Message
Address Book reading failure
Memory acquiring failure
Terminal IP address unset
Terminal mail address unset
SMTP address unset
Server time time-out error
NIC time time-out error
NIC access error
SMTP server connection error
HOST NAME error
Terminal mail address error
Destination mail address error
Corrective Action
Turn the power OFF and then back ON.
Perform the job in error again.
Reset the data in the Address Book and
perform the job again.
If the error still occurs, contact your service
representative.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
Ask your administrator to set the IP address
of the equipment.
Ask your administrator to set the E-mail
address of the equipment.
Ask your administrator to set the SMTP
server address.
Check if the SMTP server is operating
properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your service representative.
Ask your administrator to set the login name
or password of SMTP server and perform the
job again. Check if the SMTP server is
operating properly.
Ask your administrator to check if there is an
illegal character in the device name. Delete
the illegal character and reset the appropriate
device name.
Ask your administrator to check if there is an
illegal character in the E-mail address of the
equipment. Delete the illegal character and
reset the appropriate E-mail address, then
perform the job again.
Check if there is an illegal character in the
Destination E-mail address. Delete the illegal
character and reset the appropriate
Destination E-mail address, then perform the
job again.