During Maintenance Or Inspection - Toshiba E-studio 200L Operator's Manual

GENERAL PRECAUTIONS (Cont.)

During Maintenance or Inspection

Warning
- NEVER attempt to repair, disassemble or modify the multifunctional digital systems by yourself. You could
cause a fire or get an electric shock.
ALWAYS contact your Service representative for maintenance or repair of the internal parts of the
multifunctional digital systems.
- ALWAYS keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could cause
a fire and give you an electric shock due to the heat released by electric leakage.
- DO NOT let liquids such as water and oil get into the system when cleaning the floor. This could cause a
fire and give you an electric shock.
Caution
- DO NOT touch the stapling area. The actual needle point could cause you personal injury.
"Saddle-stitch Finisher (optional)"
Other Points
- DO NOT use such solvents as thinner or alcohol when cleaning the surface of the multifunctional digital
systems.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.
16
Page 279, "Single-staple Finisher (optional)" Page 277