Selecting Finishing Modes; Finishing Modes And Finishers (Optional) - Toshiba E-studio 200L Operator's Manual

3. SELECTING FINISHING MODES

Finishing Modes and Finishers (Optional)

The functions available differ depending on whether a finisher is installed and which type of finisher (MJ-
1022, MJ-1025, MJ-5004 and MJ-5005) it is.
* The touch panel used in this chapter appears when the optional saddle-stitch finisher (optional) with hole
punch unit (optional) is installed in your copier.
3
Type of Finishing Mode
- MJ-1025: Saddle-stitch finisher
- MJ-1022: Single-staple finisher
- MJ-5004: Job separator
- MJ-5005: Offset tray
- MJ-6005: Hole punch unit
Confirm the finishing mode type of your equipment with the following table.
Finishing
MJ-1025 + MJ-6005
MJ-1025
MJ-1022
MJ-5004
MJ-5005
No finisher
84
3.SETTING OF BASIC COPY MODES
Type of finishing mode
Sort/ Rotate Staple
Group sort sort
Y Y Y
Y Y Y
Y Y Y
Y Y N
Y Y N
Y Y N
Magazine Magazine sort
sort + Saddle stitch
Y Y
Y Y
Y N
Y N
Y N
Y N
Y: Available
N: Not available
Saddle Hole
stitch punch
Y Y
Y N
N N
N N
N N
N N