Manual Paper Selection - Toshiba E-studio 200L Operator's Manual

1.PAPER SELECTION (Cont.)

Manual Paper Selection

Automatic Paper Selection cannot be used for highly transparent originals such as OHP films and tracing
paper, wholly dark originals or originals with dark borders, or irregular sized originals such as newspapers
and magazines. For these types of originals, use manual paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of the
drawer ("Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses"
use the bypass copying ("Bypass Copying"
3
1
Place paper in the drawer(s).
- "4.SETTING COPY PAPER"
- When using this mode in bypass copying "Bypass Copying"
Page 61, be sure to specify the paper size.
2
Place the original(s).
- "2.SETTING ORIGINALS"
3
Press the drawer button representing the
desired paper size or select the paper size
with
- Or press the [ZOOM...] button to enter the next screen, and press
the button of the desired paper size.
- "Setting the [OTHER SIZE] button"
Select other copy modes as required.
4
Press the [START] button.
76
3.SETTING OF BASIC COPY MODES
Page 35
Page 51
button.
Page 77
Page 61)
Page 38) or