Front Door Lock Assembly Components
4
(b)
1. Front door latch assembly
: Apply lithium grease 99000-25011 to sliding and rotating parts and spring if any.
2. Outside handle assembly
: Apply lithium grease 99000-25011 to sliding part.
3. Outside handle frame
: Apply lithium grease 99000-25011 to sliding part and spring.
Front Door Lock Assembly Removal and
Installation
Removal
1) Remove door trim and door sealing cover referring to
step 1) to 6) of "Front Door Glass Removal and
Installation in Section 9E".
2) Raise window all the way up.
3) Remove door sash (1).
Repair Instructions
(a)
1
S6RW0D9606002
1
I4RS0A960007-01
5
6
4. Latch striker
5. Key cylinder
6. Inside handle bezel
4) Remove key cylinder mounting bolt (1), and then
remove key cylinder (2).
5) Disconnect door opening control rod (1) from outside
handle.
6) Disconnect door lock motor lead wire at coupler (if
equipped).
Security and Locks:
S6RW0D9606001
2
3
I5RW0A960003-01
: 5.0 N⋅m
(0.5 kgf-m, 4.0 lb-ft)
: 10 N⋅m
(1.0 kgf-m, 7.5 lb-ft)
2
1
I4RS0B960005-01
9F-6