Switch for Other Window than Driver Side
1) Remove driver side door trim referring to step 1) to
3) of "Front Door Glass Removal and Installation".
2) Remove power window main switch from door trim.
3) Check for continuity between terminals as shown
below.
If check result is not as specified, replace power window
main switch.
[A]: Left-hand steering vehicle
[B]: Right-hand steering vehicle
Power Window Sub Switch Inspection
1) Remove front door trim from door panel, refer to Step
1) to 3) of "Front Door Glass Removal and
Installation".
2) Remove power window sub switch from door trim.
3) Check for continuity between terminals at each
switch condition.
If check result is not as specified, replace switch.
I5RW0A950036-02
Glass / Windows / Mirrors:
S6RW0D9506022
9E-22
I5JB0A950037-01