Seats
Fully folded position
Example of operations for the
1/3 section. They are identical for the
2/3 section.
-
Place the head restraints in the low
position.
-
If necessary, move the front seats
forward.
-
Press the grey control located on
the upper part of the seat backrest.
-
Fold the seat backrest onto the
seat cushion.
-
Raise the grey control bar, located
at the rear of the seat cushion.
-
Tilt the entire seat forward.
Putting back in place
Tilt the entire seat rearwards until it
locks into place.
Raise the seat backrest.
The seat is locked correctly when the
control (at the top of the seat back) is
no longer visible.
Check that the seat is locked
on the floor securely when it is
returned to the sitting position.