Steering mounted controls
Selecting the function
-
Place the switch in the LIMIT
position. The limiter is selected
but is not yet active. The screen
indicates the last programmed
speed setting.
Programming a speed setting
A speed can be programmed without
activating the limiter but with the
engine running.
To memorise a speed higher than the
previous one:
-
Press the SET + button.
A brief press increases the speed by 1 mph (km/h).
A maintained press increases the speed in steps of
5 mph (km/h).
To memorise a speed lower than the
previous one.
-
Press the SET - button.
A brief press decreases the speed by 1 mph (km/h).
A maintained press decreases the speed in steps of
5 mph (km/h).
On / Off
Pressing this button once activates
the limiter, pressing the button again
deactivates it (OFF).