CITROEN 2015 Berlingo Multispace Handbook page 67

Selecting the function
- Place the switch in the CRUISE
position. The cruise control is
selected but is not yet active and
no speed has been programmed.
First activation /
Programming a
speed
- Reach the chosen speed by
pressing the accelerator.
- Press the SET - or SET + button.
This programmes/activates the speed
setting and the vehicle will maintain
this speed.
Temporarily exceeding the
speed setting
It is possible to accelerate and drive
momentarily at a speed greater than
the programmed speed setting. The
value programmed flashes.
When the accelerator pedal is
released, the vehicle will return to the
programmed speed.
Deactivation (off)
- Press this button or
the brake or clutch
pedal.
Steering mounted controls
Reactivation
- Following deactivation of the cruise
control, press this button.
Your vehicle will return to the last
programmed speed.
Alternatively, you can repeat the "first
activation" procedure.
4