CITROEN 2015 Berlingo Multispace Handbook page 35

Warning lamp is
on with needle
in the red
zone.
Coolant
temperature
and level
flashing.
on temporarily. minor faults or warnings.
Service
remaining on.
on then
flashing.
Seat belt not
fastened
accompanied
by an audible
signal then
remains on.
on.
ECO
flashes for a
few seconds,
then goes off.
indicates
an abnormal increase in
temperature.
a drop in the coolant level.
major faults.
the driver and/or front
passenger has not fastened
their seat belt.
the vehicle is moving with
the driver's and/or front
passenger's seat belt not
fastened.
The Stop & Start system
has put the engine in
STOP mode following a
vehicle stop (red light, traffic
jam, etc...).
STOP mode is temporarily
unavailable.
or
START mode has been
invoked automatically.
Instruments and controls
Solution - action
Park and switch off the ignition then allow to cool.
Visually check the level.
Chapter 7, "Levels" section.
Contact a CITROËN dealer or a qualified
workshop.
Consult the alert log in the display or screen.
If your vehicle is equipped with a trip computer or
a screen: refer to the "Steering mounted controls"
section in Chapter 4.
Contact a CITROËN dealer or a qualified
workshop.
Pull the strap then insert the tongue in the buckle.
Check that the seat belt is fastened by pulling the
strap.
Chapter 5, "Seat belts" section.
As soon as you want to move off, the warning
lamp goes off and the engine restarts
automatically in START mode.
Chapter 3, "Stop & Start" section.
3