BLIND, LOAD SPACE COVER
The load space cover is the roller blind
type. Take care not to place heavy
objects on the load space cover when
unreeled.
To install it
Place the row 3 seats in the fully folded
position.
Raise the storage flap at the boot sill.
Take hold of the roller in the centre and
compress it towards the left-hand pillar.
Raise the assembly.
Position the load space screen so as to
present the rear load space cover flaps
towards you.
Engage the left-hand lug of the roller in
the support A.
Practical information
Compress then place the right-hand
lug facing the support B.
Release to engage the roller in its
support.
Unroll the load space cover to the rear
side pillars.
Engage the ends in the rear notches to
keep it taut.
4