CITROEN 2015 Berlingo Multispace Handbook page 121

Table of Contents

Advertisement

ANTI-SLIP REGULATION (ASR)
AND DYNAMIC STABILITY
CONTROL (DSC)
These systems are linked and 
complement the ABS.
The ASR system is very useful for 
maintaining optimum drive and 
avoiding losses of control of the vehicle
on acceleration.
The system optimises drive to prevent 
the wheels skidding, by acting on the 
brakes of the drive wheels and on the 
engine. It also allows the directional 
stability of the vehicle to be improved 
on acceleration.
Use the dSC to hold your course
without attempting to countersteer.
If there is a variation between the
trajectory followed by the vehicle and 
that required by the driver, the dSC
system automatically acts on the 
engine and the brake of one or more 
wheels, in order to put the vehicle back 
on course.
Operation
The warning lamp flashes 
when operation of the aSR or
DSC is triggered.
Deactivation
In certain exceptional conditions
(starting the vehicle when stuck in mud 
or snow, or on loose ground...), it could 
prove useful to deactivate the aSR and
DSC systems to make the wheels spin 
and regain grip.
-
Press the button or turn
the dial to the dSC oFF
position (depending on
model).
The LED comes on: the ASR and 
DSC systems no longer come into 
play.
They engage again:
automatically above 30 mph 
(50 km/h),
manually by pressing the 
button again or by turning
the dial to this position
(depending on model).
Driving safely
Operating fault
When a malfunction of the 
systems occurs, the warning 
lamp and the LED come on, 
accompanied by an audible 
signal and a message in the 
screen.
Contact a CITRoËn dealer or a
qualified workshop to have the system 
checked.
The warning lamp may also come on if 
the tyres are under-inflated. Check the 
pressure of each tyre.
Good practice
The ASR/DSC systems offer increased 
safety during normal driving, but 
should not incite the driver to take risks 
or to drive at high speed.
The operation of these systems is 
ensured if the recommendations 
of the manufacturer regarding 
the wheels (tyres and rims), the 
braking components, the electronic 
components and the fitting and repair 
procedures are observed.
After an impact, have these systems 
checked by a CITROËN dealer or a 
qualified workshop.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents