Changing a bulb
3. Direction indicators
Type B, PY21W - 21W (amber)
-
Remove the cover by pulling the
flexible rubber tab.
-
Turn the bulb holder a quarter turn
anticlockwise.
-
Remove the bulb by pressing it
lightly while turning it anticlockwise.
-
Change the bulb.
-
Ensure that the cover is refitted
correctly all round to assure correct
sealing.
4. Front foglamps
Type C, H1 - 55W
-
Remove the three clips and the
screw securing the wheel arch liner,
located below the bumper.
-
Move the wheel arch liner upwards.
-
disconnect the bulb holder
connector by pressing the tab at
the top.
-
Remove the bulb holder by
squeezing the two clips (at top and
bottom) using a finger and thumb.
-
Replace the module (bulb holder
and bulb).
-
Carry out the operations in reverse
order to fit the module and refit the
wheel arch liner.