Warning Lamps - CITROEN 2015 Berlingo Multispace Handbook

Instruments and controls

WARNING LAMPS

Each time the vehicle is started: a series of warning lamps comes on applying a self-test check. They go off almost immediately.
Engine running: the lamp becomes a warning if it remains on continuously or flashes.
This initial warning may be accompanied by an audible signal and a message in the screen.
Do not ignore these warnings.
Warning lamp is
on, associated
with another
warning
lamp and
STOP
accompanied
by a message
in the screen.
on.
on.
Parking
brake / Brake
fluid level /
remaining on even
EBFD
though the level
is correct and
associated with the
ABS warning lamp.
on while
driving.
Engine oil
pressure and
remaining on,
temperature
even though the
level is correct.
indicates
major faults linked with
the "Brake fluid level",
"Engine oil pressure and
temperature", "Coolant
temperature", "Electronic
brake force distribution" and
"Power steering" warning
lamps.
that the parking brake is applied
or has not been released fully.
low brake fluid level.
a fault with the electronic
brake force distribution.
low pressure or a high
temperature.
a major fault.
Solution - action
You must stop as soon as it is safe to do
so. Park and switch off the ignition. Have it
checked by a CITROËN dealer or a qualified
workshop.
Releasing the parking brake switches off the
warning lamp.
Top up using a fluid recommended by CITROËN.
You must stop as soon as it is safe to do so.
Park and switch off the ignition.
Have it checked by a CITROËN dealer or a
qualified workshop.
Park and switch off the ignition then allow to cool.
Visually check the level.
Chapter 7, "Levels" section.
Have it checked by a CITROËN dealer or a
qualified workshop.