Auto Dialing - Avaya ETR 6 User Manual

3.6 Auto Dialing

Auto dialing uses numbers stored under one of the phone's programmable buttons. Whenever a number need to be dialed,
pressing the button will dial the stored number.
To use an auto dial button
1. At dial tone or whenever you want to dial a number, press the programmed auto dial button.
2. The stored number is dialed.
To create an auto dial button (ETR 18D/ETR 34D Phone)
1. At the phone press Feature 00.
2. Program Extension: is shown on the display.
3. Press the button that you want to edit or enter a number between 03 to 80 to select a button. The current setting
of the button is displayed.
4. To create an auto dial button to store an extension number press Intercom 1. For a button to store any other type
of number press Intercom 2.
5. Enter the number for calls made using the button. The number can include * and # and the following special
characters: (Intercom 2 type only)
Function Press to insert
Pause HOLD
Transfer SPEAKER
Stop CONFERENCE
6. The current setting of the button will now be AD-I (auto dial intercom) or AD-O (auto dial other) followed by the
stored number.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
· To clear, press the MIC/HFAI key.
PARTNER Version ETR Phone User Guide
IP Office Essential Edition
Character Description
P Inserts a 1.5 second pause.
R Send a hook-switch flash signal.
S Stop dialing.
Advanced Features: Call Coverage
- Issue 1a (16 May 2010)
Page 25