Jenn-Air S136-C Use And Care Manual page 35

8. At end of time set, oven will stop automatically and not beep.
9. After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVER
to the left. The oven door can now be opened.
10. Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF after
the doo.r is unlocked.
IMPORTANT- IF THE TEMPERATURE KNOB IS TURNED TO OFF BEFORE
THE DOOR IS UNLOCKED, THE DOOR WILL NOT OPEN. Forcing the lock
will damage the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock
the door, then turn TEMPERATURE knob OFF.
NOTE: A fan comes on whenever the SELECTOR knob is set on CLEAN; there-
fore, the fan will continue to operate at the end of the cleaning process until
the SELECTOR knob is turned OFF. The fan will also start as soon as the
controls are set for a deiayed start of the self-cleaning process.
To check START TIME before cleaning begins:
Hold in START TIME
button until the words START TIME appear in the Display Window. The start time
will be displayed briefly, then Display will return to time of day.
To change START TIME before cleaning begins:
1. Hold in START TIME button until the words START TIME appear in the Display
Window.
2. Turn SET dial to time desired.
3. Push ENTER button to enter new start time.
The indicator words STOP TIME and a new stop time will appear in Display
Window. The new stop time will be 21/2hours later than the new start time.
For a heavily soiled oven, the stop time will need to be changed by turning the
SET dial.
4. Push ENTER button to enter new stop time.
To check STOP TIME:
Hold in STOP TIME button until the words STOP TIME
appear in the Display Window. The stop time will be displayed briefly, then Display
will return to on-going program.
To change STOP TIME before cleaning begins:
1. Hold in STOP TIME buton until words STOP TIME appear in the Display Window.
2. Turn SET dial to desired STOP TIME.
37