Jenn-Air S136-C Use And Care Manual page 10

The gril; accessory consists of two black grill grates, a grill element and two grill-rocks.
To Install Grill
1. Before installing grill components, be certain surface controls are in the OFF position.
2. Place the two grill-rocks into an empty grill basin with their handles running parallel
to the front of the range. These grill-rocks must be used since they support the
grill element.
3. Position the grill element with the terminal plug towards the terminal receptacle.
This receptacle is located at the front of the left side and at the back of the right
side of the range. Slide the element towards the receptacle until the terminal plug
is completely engaged.
4. The grill element should now rest on the handles of the grill-rocks.
5. Place the black grill grates on the top of the range top.
To Remove Grill
1. Remove grill components once they are cool. Be sure control switches are in the
OFF position.
2. To remove grill element, pull away from receptacle until it is unplugged. Do not lift
the element while it is engaged in the receptacle since this could damage the terminal.
3. A storage tray, Model A350, is available for purchase and can be used for storing
the grill assembly.
Installing Other Accessories
1. Remove the two black grill grates from the grill. Now you are ready to use the
optional grill accessories.
2. Review the instructions for installing and using the accessories that are packaged
with the accessory.
12