Table of Contents
Advertisement
Heat Controller, Inc.
3. USE AND MAINTENANCE
3.8 Sleep mode:
The sleep mode changes the set temperature of the unit over time while you sleep to provide
optimal comfort in an effort to match the body's natural temperature changes during sleep. To activate sleep mode,
simply press the sleep button. In the sleep mode, the set temperature of the unit will either increase in cooling mode or
decrease in heating mode by 1 degree after an hour, then by another degree an hour later. The sleep mode function can
be cancelled by pressing the sleep button at any time.
...........................................................................................................................
OWNER'S MANUAL
14
Packaged Thru-The-Wall Heat Pump
Sequence of operation
Press the MODE button "
1
select cool mode " "/ heat mode " "
or auto mode "
". The unit will run in
the set mode.
Press UP "
" or DOWN "
2
button,
to
select
temperature.
Press the SLEEP button "
3
select sleep function. This icon will
display on LCD. Press it again to
cancel the sleep function.
If the sleep function is selected, the
4
fan speed is automatically set in low
speed.
",to
"
the
desired
", to
Advertisement
Table of Contents
