Table of Contents
Advertisement
Heat Controller, Inc.
3. USE AND MAINTENANCE
Timers can be used to turn the unit off or on when not needed, such as when you are not at home.
3.10 Timer off function
3.11 Timer on function
...........................................................................................................................
OWNER'S MANUAL
16
Packaged Thru-The-Wall Heat Pump
Sequence of operation
The unit must be ON for the Timer off
1
function.
Press the MODE button "
2
select the desired mode.
Press UP "
" or DOWN "
3
button,
to
select
temperature
Press
the
FAN
4
"
", to select the fan speed;
is low speed,
is middle speed,
is high speed,
auto speed. For auto fan, the speed is
chosen
automatically
difference between room temperature
and setting temperature.
Press the TIMER OFF button " ", to
5
select the time to switch off the unit.
Press the button "
hour. Press the button " " to adjust
up 1 minute. When the time is over,
the unit will switch off automatically.
Press this button again to cancel
TIMER OFF setting.
Sequence of operation
The unit must be OFF for the Timer on
1
function.
Press the TIMER ON button "
2
select the time to switch on the unit.
Press the button "
hour. Press the button " " to adjust
up 1 minute. Set up the operation
MODE, SET TEMPERATURE, AND
FAN SPEED. When the time arrives,
the unit will start automatically. Press
this button again to cancel TIMER ON
setting.
", to
"
the
desired
SPEED
button
(flashing) is
by
the
" to adjust up 1
", to
" to adjust up 1
Advertisement
Table of Contents
