Table of Contents
Advertisement
Heat Controller, Inc.
3. USE AND MAINTENANCE
NOTE: Memory Mode is an automatic function of the unit that allows the unit to run in the last mode
it operated in when it is turned back on after being off.
3.3 Heating mode
...........................................................................................................................
OWNER'S MANUAL
10
Packaged Thru-The-Wall Heat Pump
Sequence of operation
Press the ON/OFF button "
1
switch on the unit. The unit will begin
to run in memory mode.
Press the MODE button "
2
select heat mode " ". The unit will
heat.
Press UP "
" or DOWN "
3
button,
to
select
temperature.
Press
the
FAN
"
", to select the fan speed;
is low speed,
is middle speed,
4
is high speed,
auto speed. For auto fan, the speed is
chosen
automatically
difference between room temperature
and setting temperature.
Press the ON/OFF button "
5
switch off the unit.
", to
",to
"
the
desired
SPEED
button
(flashing) is
by
the
", to
Advertisement
Table of Contents
