Macro Pdf Transmit / Decode Mode Symbols - Symbol Cyclone M2000 Series Product Reference Manual

Macro PDF Transmit / Decode Mode Symbols

Select only one of the four options below for handling the decoding of Macro PDF. The
scanner can handle up to 64K bytes of decoded data, including any optional field
information, except in the mode Transmit Each Macro PDF Symbol Decoded in Sequential
Order, where there is no limit to the size of the Macro PDF set.
• Buffer All Symbols / Transmit Macro PDF When Complete activates transmission
of all decode data from an entire Macro PDF sequence. Transmission does not
occur until the entire Macro PDF sequence is scanned and decoded. This is the
default option.
If the decode data exceeds the limit of 64 symbols or 64K bytes, there is no
transmission because the entire sequence has not been scanned. Use the
parameter Flush Macro PDF Buffer to purge the buffer.
• Transmit Any Symbol in Set / No Particular Order causes transmission of data from
up to 1024 Macro symbols as decoded, whether it is in sequential order or not.
• Scan in Sequence Only / Transmit in Sequence Without Buffering causes
transmission of data from up to 1024 symbols within the Macro PDF sequence as
decoded, provided the Macro PDF symbols are scanned in order. If you do not
scan the symbols in order, an error occurs.
• When Buffer Scans Out of Order / Transmit Scans in Order is enabled, decode data
from each symbol within the Macro PDF sequence is transmitted when decoded,
provided that the Macro PDF symbols are scanned in order. Decode data from
symbols out of order in the Macro PDF sequence is buffered. The scanner can
buffer up to 64 symbols or 64K bytes.
Parameter Menus
3-117