Host Serial Response Time-Out; Host Serial Rts Line State - Symbol Cyclone M2000 Series Product Reference Manual

TM
Cyclone M2000 Series Product Reference Guide

Host Serial Response Time-out

This parameter specifies how long the scanner waits for an ACK or NAK before resending.
Also, if the scanner wants to send, and the host has already been granted permission to
send, the scanner waits for the designated time-out before declaring an error.
The delay period can range from 0.0 to 9.9 seconds in 0.1 second increments. After
scanning the bar code below, scan two numeric bar codes beginning on page 3-130.
Time durations of less than 1.0 second require a leading zero. If you make an error, or
wish to change your selection, scan the Cancel bar code on page 3-132.
Host Serial Response Time-out

Host Serial RTS Line State

This parameter sets the default host serial RTS line state to either high or low.
Host: Low RTS
Host: High RTS
3-104