Transmit "No Decode" Message
This feature gives you the option to transmit "NR" when a symbol does not decode. Prefixes
and suffixes enabled will be appended around this character.
Transmit "NO DECODE"
Message
Decode Redundancy
When you select ENABLE CODABAR DECODE REDUNDANCY, a Codabar symbol must
be decoded in both directions before being accepted as a successful decode. If you select
ENABLE ALL CODE TYPES DECODE REDUNDANCY, all bar code symbols must be
decoded in both directions before being accepted as successful decodes.
Enable CODABAR
Decode Redundancy
Disable CODABAR
Decode Redundancy
Code Types
Selecting the ENABLE ALL CODE TYPES bar code below enables the following
symbologies:
UPC Versions A and E (EAN 8 and 13)
!
Code 39
!
Interleaved 2 of 5
!
Programming the LS 1004
Do Not Transmit "NO
DECODE" Message
Enable ALL CODE
TYPES
Decode Redundancy
Disable ALL CODE
TYPES
Decode Redundancy
4-15