Table of Contents
Advertisement
Programming
Programming Feature Access Buttons
Programming of the feature access buttons may require several selections
involving many LCD screens. If an abbreviation used is not familiar to you,
consult Appendix B, Display Abbreviations on page 89.
•
To create a feature access button,
1. SELECT OPTIONS .
2. SELECT Programming .
3. SELECT NEXT until the Feature Button option appears.
4. SELECT Feature Button .
5. SELECT the Feature Level interactive button
to toggle between 1 and 2.
6. SELECT one of the three options.
•
•
•
7. SELECT the button you want to assign as a
feature button.
8. SELECT the feature you want to assign to by
SELECTING the corresponding interactive
button. (SELECT NEXT to scroll through the list of available
feature.
9. REPEAT steps 1 through 7 for other features.
10.SELECT EXIT to end programming.
•
To clear a feature button assignment,
1. REPEAT the above procedure, but SELECT CLEAR before
selecting storage location button.
64
S h o w E m p t y L o c a ti o ns - green lights
Show All Locations - red lights
Feature Level
Select Feature Location
Show Empty Locations
Show All Locations
Feature Level
EXIT
HOLD
PREV
PARK
Selecting a Feature
IP Speakerphone Station User's Guide
GCA70-377
1
Advertisement
Table of Contents
