Making Intercom Calls - Comdial 8900-IP Series User Manual

Making Calls

Making Intercom Calls

There are two methods for making an intercom call. One causes the called
telephone to ring (tone-first). The other causes your voice to sound out at the
called telephone (voice-first). Your installer can set the system to deliver either
tone-first or voice-first calling.
NOTE: The following instructions assume a tone-first setting. You can
change a call to voice announce signaling for that call simply by pressing
the INTERCOM button again after dialing the extension number or by press-
ing the DSS/BLF button again.
•
To manually cause the other telephone
to ring (tone calling),
1. PRESS INTERCOM OR SELECT Dial by
Name .
2. DIAL extension number (called telephone will
ring).
•
To tone call automatically,
1. PRESS DSS/BLF button (called telephone will
ring).
NOTE: The following instructions assume a voice-first default setting. Any
user can change a call to a tone signaling for that call simply by pressing the
INTERCOM button again after dialing the extension number or by pressing
the DSS/BLF button again.
•
To voice announce manually,
1. PRESS INTERCOM.
2. DIAL extension number.
3. SPEAK your announcement.
•
To voice announce automatically,
1. PRESS DSS/BLF button.
2. SPEAK your announcement.
28
Wednesday 19
Dial by Name
Voice Mail
Dial Extension or Code
Ext.XXXX PXXX
Wednesday 19
Dial by Name
Voice Mail
Dial Extension or Code
Ext.XXXX PXXX
IP Speakerphone Station User's Guide
GCA70-377
11:36am
J Smith
11:36am
J Smith