Table of Contents
Advertisement
GCA70-377
5. PRESS SPEAKER to end.
•
To transfer a call to a pager park orbit for retrieval and
transmit the call's park orbit code and caller ID information
(if available),
1. ANSWER call AND SELECT Transfer .
2. DIAL extension number.
3. If the called station does not answer or is busy, SELECT TRACK .
4. HEAR confirmation beep (page accepted) OR HEAR busy tone
(page not accepted).
5. PRESS SPEAKER button to end.
NOTE:
Parked pager calls will recall to your station after a preprogrammed
time-out. You can either place the call into another page orbit or retrieve the
call.
•
To retrieve a call that you parked using the paging option,
1. PRESS HOLD button to scroll your held calls, (display shows
PAGE and extension number of each parked call).
2. PRESS TAP to retrieve the displayed parked call.
•
If you receive a parked call message on your pager unit,
1. GO to any system station.
2. PRESS INTERCOM.
3. DIAL pager orbit code (
4. RETRIEVE call.
•
To enable or disable a pager unit at your station,
1. PRESS INTERCOM.
2. DIAL
3. PRESS SPEAKER to end.
IP Speakerphone Station User's Guide
#800
#07
to enable, OR DIAL
Other Advanced Features
#899
to
).
#06
to disable.
73
Advertisement
Table of Contents
