Fuse Replacement - Kohler command pro ECH749 Service Manual

Electrical System
FUSES
This engine has 3 blade type automotive fuses.
Replacement fuses must have same rating as blown
fuse. Use fuse chart below to determine correct fuse.
Wire Color
2 Purple Wires
1 Red Wire w/Black Stripe
1 Red Wire w/White Stripe
2 Red Wires

Fuse Replacement

1. Shut engine off and remove key.
2. Locate fuse holders.
3. Remove fuse cover and pull out fuse.
4. Inspect fuse for a solid fusible link or a broken
fusible link. Replace fuse if fusible link is broken. If
you are not sure if fusible link is broken, replace
fuse.
5. Insert fuse into fuse holder until it is seated properly.
Install fuse cover.
98
Fuse Rating
30-amp Fuse
10-amp Fuse
10-amp Fuse
KohlerEngines.com 24 690 01 Rev. K