Kohler command pro ECH749 Service Manual page 15

TORQUE SPECIFICATIONS
Ignition (continued)
Crankshaft Position Sensor
Earlier Design Bracket
Crankshaft Position Sensor to Bracket
Screw
Crankshaft Position Sensor Bracket to
Crankcase Screw
Crankshaft Position Sensor
Later Design Bracket
Crankshaft Position Sensor to Bracket
Screw
Crankshaft Position Sensor Bracket to
Crankcase Screw
Intake Manifold
Fastener (torque in 2 increments)
Manifold Absolute Pressure (MAP)
Sensor Fastener (Engines with
Separate MAP and Intake Air
Temperature Sensors)
Temperature/Manifold Absolute
Pressure (TMAP) Sensor Fastener
(Engines with Combined Sensor)
Air Cleaner to Throttle Body Fastener
Nut
Heavy-Duty Air Cleaner Mounting
Bracket Fastener
Fuel Injector Cap Fastener
Muffl er
Retaining Nut
Oxygen Sensor
Oil Cooler
Oil Cooler/Adapter Nipple
Fastener
Into Blower Housing
Between Oil Cooler Hoses
Speed Control Bracket
Fastener Assembled to Cylinder Heads
Fastener Assembled to Blower Housing
Fastener Torque
Values are in Metric units. Values in parentheses are English equivalents.
3
Lubricate threads with engine oil prior to assembly.
5
24 690 01 Rev. K
3,5 ECH630-ECH680 ECH730-ECH749
11.3 N·m (100 in. lb.)
8.3 N·m (73 in. lb.)
6.8 N·m (60 in. lb.)
7.3 N·m (65 in. lb.)
fi rst to 7.8 N·m (69 in. lb.)
fi nally to 10.5 N·m (93 in. lb.)
7.3 N·m (65 in. lb.)
7.3 N·m (65 in. lb.)
8.2 N·m (73 in. lb.)
5.8 N·m (51 in. lb.)
7.3 N·m (65 in. lb.)
27.8 N·m (246 in. lb.)
50.1 N·m (37 ft . lb.)
28.5 N·m (21 ft . lb.)
2.8 N·m (25 in. lb.)
2.3 N·m (20 in. lb.)
10.7 N·m (95 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
2.8 N·m (25 in. lb.) into new holes
2.3 N·m (20 in. lb.) into used holes
KohlerEngines.com
Specifi cations
CH26 CH735
fi rst to 7.4 N·m (66 in. lb.)
fi nally to 9.9 N·m (88 in. lb.)
24.4 N·m (216 in. lb.)
27 N·m (20 ft. lb.)
10.7 N·m (95 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
CH745
15