Developing Motor /K (M5); Toner Supply Motor /Y, M (M6) - Konica Minolta bizhub C30P Service Manual

Field Service Ver. 2.0 May 2007
6.3.25

Developing motor /K (M5)

1. Remove the PWB box /1.
See P.67
6.3.26

Toner supply motor /Y, M (M6)

1. Remove the PWB box /1.
See P.67
[3]
[1]
[2] [3]
A011F2C065DA
[1]
[2]
A011F2C066DA
2. Disconnect the connector [1], and
remove four screws [2] and the
developing motor /K [3].
NOTE
• When installing the developing
motor /K, try to insert it straight,
and take care not to damage the
gears.
2. Disconnect the connector [1], and
remove two screws [2] and the toner
supply motor /Y, M [3].
NOTE
• When installing the toner supply
motor /Y, M, try to insert it straight,
and take care not to damage the
gears.
6. Other
69