Exit Roller Up/Down Motor - Konica Minolta bizhub C30P Service Manual

2. Other
[4]
[3]
[1]
2.3.15

Exit roller up/down motor

1. Remove the rear cover.
See P.8
2. Remove the FS control board.
See P.13
3. Remove the Transport motor assy.
See P.16
4. Remove the exit motor assy.
See P.17
[2]
[1]
18
[2]
[1]
A01FF2C017DA
[3]
[2]
A01FF2C513DA
A01FF2C514DA
Field Service Ver. 2.0 May 2007
6. Disconnect the connector [1].
7. Remove two screws [2], spring [3]
and remove the exit motor assy [4].
NOTE
• To reinstall the exit motor assy,
hook the spring first and screw the
exit motor assy while the spring is
stretched to a certain degree.
8. Remove two screws [1], connector
[2] and remove the exit motor [3].
5. Remove five screws [1] and remove
the mounting metal plate assy [2].