Temperature/ Humidity Sensor (Tem/Hums) - Konica Minolta bizhub C30P Service Manual

6. Other
6.3.35

Temperature/ humidity sensor (TEM/HUMS)

1. Open the right door.
[2]
82
[1]
[2]
A011F2C097DA
[1]
A011F2C099DA
[1]
[2]
A011F2C100DA
Field Service Ver. 2.0 May 2007
NOTE
• When reinstalling the shaft and the
media feed clutch /2, make sure that
the protrusion [1] on the media feed
clutch /2 fits into the locking slot
[2].
2. Remove the screw [2] from the sen-
sor holder [1].
3. Remove the sensor holder [1] by
sliding it to the front.
4. Remove the screw [1], disconnect
the connector [2], and remove the
temperature/humidity sensor.