Economy Print; Glossy Mode; Pcl Setting - Konica Minolta bizhub C30P Service Manual

9. Menu
9.5.6

ECONOMY PRINT

• Selects whether or not to use the economy print mode where job prints with lower
Function
print density and less toner consumption.
• To reduce toner consumption
Use • In the economy print mode, toner consumption will be reduced by approx. 30 % com-
pared to the normal mode.
Setting • The default setting is OFF.
/procedure
NOTE
• When [GLOSSY MODE] is set to "ON", the economy print setting is disabled
even if the economy mode is set to "ON."
9.5.7

GLOSSY MODE

• Selects whether or not to use the glossy mode that increases toner adhesion and
Function
enhances glossiness of images.
• To print more glossy images.
Use
• This mode can be used for media types other than transparencies and envelopes.
Setting • The default setting is OFF.
/procedure
NOTE
• When this setting is set to "ON", the [ECONOMY PRINT] setting is automati-
cally recognized as "OFF."
9.5.8

PCL SETTING

A. CONTRAST
Function • Sets the contrast of a PCL printed image.
Use • To adjust the contrast of a PCL printed image.
Setting • The default setting is 0%.
/procedure
-15 %
B. IMAGE PRINTING
(1) RGB SOURCE
Function • Sets the RGB color space of the image to be printed.
• To set the input RGB color space that is used for printing the image (picture).
Use sRGB
DEVICE COLOR: It uses the device color in the color space.
Setting • The default setting is sRGB.
/procedure
124
ON
ON
-10 % -5 % "0 %"
: Profile that has been preset to the printer.
DEVICE COLOR
Field Service Ver. 2.0 May 2007
"OFF"
"OFF"
+5 % +10 % +15 %
"sRGB"