Set Access Code (Remote Access Code) And Mailbox Security - AT&T SynJ SB67148 User Manual

Answering system
Deskset mailbox setup

Set access code (remote access code) and mailbox security

You can enter a four-digit number (0000-9999) to allow remote access to
your deskset mailbox from any touch-tone telephone. Unless you change it,
the remote access code is 0000.
This access code is also used for mailbox security. If you turn this feature on,
you must enter the access code each time you access the deskset mailbox. If
you do not want to enter the access code every time you access the deskset
mailbox, turn this feature off.
When the deskset is not in use, press the Menu softkey.
1.
2. Press DIR or
Press the Select softkey twice to select Set access
3.
code.
4. Use the dialing keys to enter a four-digit number.
• Press X/DELETE to backspace and delete a digit.
Press the Next softkey.
5.
6. When the deskset displays Mailbox security, press
DIR or CID to scroll to On or Off.
7. Press the Save softkey to save the setting. There is a
confirmation tone.
NOTES:
• The access code must have four digits. You can only press the Next softkey after you have
entered four digits.
• You will hear an error tone if you enter an access code that is already assigned. Then the
deskset displays Please enter another access code.
CID to scroll to Mailbox setup.
53
Directory
Call log
Ringer setting
>Mailbox setup
Back Select
Set access code
Notify alert
Back Select
Enter mailbox
access code
:0000
Next
Back
Mailbox security
:On
Back Save