Getting started
Add and register a deskset
Register the deskset to your SynJ SB67138 telephone base
1.
On the SynJ SB67138 telephone base, press MENU/
2.
Scroll down to Registration and press
3.
Press
/ENTER again to select Register HS.
MENU
The main telephone base screen shows
Registering new device...
4.
Press the Start softkey on the unregistered deskset. The
deskset shows Registering...Please wait. You hear a
beep sound when the registration process is successful.
The main telephone base shows Deskset registered.
The deskset shows Registered and then X:Deskset X
(X represents the extension number [1-0]; Deskset X
represents the default deskset name). It takes up to
seconds
to complete the registration process.
NOTE: If the registration fails, the screen shows Press MENU on
MAIN base, select Registration & then Register HS. Then press
Start. Try the registration process again.
/ENTER.
MENU
9
.
ENTER
SB67138:
COVM
Speed dial setup
Customer support
Registration
>
Register HS
>
Deregistration
Registering
new device...
60
Deskset
registered
SB67148:
2:Deskset 2